top of page

Research Products

PEER REVIEWED ARCHIVAL JOURNAL

  1. B. A. Karamoko, S. Dey, SB Mujib, J. Liu, W. Wang, J. Li, G. Singh, D. Voiry, C. Salameh*, B. K. Yao, and P. Miele. Polymer-Derived Silicon Oxycarbide/Graphene Oxide Porous Ceramic Monoliths Obtained from Pickering Emulsions: Application as Active Electrodes for Lithium-Ion Batteries. Chemistry of Materials, (2024) LINK

  2. S. Dey, A. Roy, SB Mujib, K. Manjunath, A. Zak, and G Singh*. Addressing Irreversibility and Structural Distortion in WS2 Inorganic Fullerene-Like Nanoparticles: Effects of Voltage Cutoff Experiments in Beyond Li+-Ion Storage Applications. ACS Omega, (2024) LINK

  3. S. B Mujib, M. Rasheed, S. R. Arunachalam, and G. Singh. Hybrid HfC‐SiCN matrix for improved oxidation resistance of carbon fiber–reinforced mini‐composites. International Journal of Ceramic Engineering & Science (2024): e10209. LINK

  4. MM Amaral*, SB Mujib*, EA Santos, J Ribeiro, H Zanin, and G Singh. A sulfur host based on silicon oxycarbide for advanced lithium‑sulfur batteries. Journal of Energy Storage 72, 108388, (2023). LINK

  5. S Dey* and G Singh. Differentiating cyclability and kinetics of Na+ Ions in surface-functionalized and nanostructured graphite using electrochemical impedance spectroscopy. Batteries 9 (11), 534, (2023). LINK

  6. SS Lokesh Vendra*, G. Singh, and R. Kumar. New insights into the electrochemical performance of precursor derived Si (Nb) OC composites as anode materials for batteries. RSC Advances, 13, 27887-27897, (2023). LINK

  7. S. Bin-Mujib*, S. R. Arunachalam, and G. Singh. Low‐temperature synthesis of HfC/HfO2 nanocomposites from a commercial single‐source precursor. International Journal of Ceramic Engineering & Science, (2023). LINK

  8. S. Dey, and G Singh*. Sodium and potassium ion storage in cation substituted 2D MoWSe2: insights into the effects of upper voltage cut-off. Nanotechnology, (2023) LINK

  9. Leonel, G.J., Scharrer, M., Singh, G., and Navrotsky, A., Structural and thermodynamic analysis of metal filler incorporations in SiaOb(M)cCd polymer derived ceramics: Ta, Hf, Nb. International Journal of Applied Ceramic Technology, (2023). LINK

  10. Leonel, G.J., Guo, X., Singh, G., and Navrotsky, A., Chemistry, structure, and thermodynamic stabilization of SiOC polymer derived ceramics made from commercial precursors. Open Ceramics, (2023). LINK

  11. S. Dey, K. Manjunath, A. Zak, and G Singh*. WS2 Nanotube-Embedded SiOC Fibermat Electrodes for Sodium-Ion Batteries. ACS Omega, (2023) LINK

  12. Leonel, G.J., Guo, X., Singh, G., Gervais, C. and Navrotsky, A., Energetics and structure of SiC (N)(O) polymer derived ceramics. Journal of the American Ceramic Society, (2023). LINK

  13. H. Ramlow, C. Marangoni, G. Motz, G. Singh, R. Machado, Electrochemical performance of SiCN embedded carbon (SiCN–C) fiber mat electrodes for lithium-ion battery: Electrospinning polysilazane in air or protective atmosphere, Open Ceramics, Volume 14, (2023) LINK

  14. M. M. Amaral, C. G. Real, V. Y. Yukuhiro, G. Doubek, P. Fernandez, G. Singh and H. Zanin*. In situ and operando infrared spectroscopy of battery systems: progress and opportunities. Journal of Energy Chemistry, (2023) LINK

  15. M. M. Amaral, S. B. Mujib, H. Zanin, and G. Singh*. A perspective on silicon-based polymer-derived ceramics materials for beyond lithium-ion batteries. Journal of Physics: Materials, (2023) LINK

  16. G. J. Leonel, X. Guo, G. Singh, and A. Navrotsky*. Compositional Analysis of SiOC (H) Powders: A Comparison of X-ray Photoelectron Spectroscopy (XPS) and Combustion Analysis. Ceramics Journal, (2023) LINK

  17. S. Dey and G. Singh*. WS2 Nanosheet Loaded Silicon-Oxycarbide Electrode for Sodium and Potassium Batteries. Nanomaterials, (2022) LINK

  18. S. Bin-Mujib*, M. Rasheed, and G. Singh. Evaluating Use of Boron-and Hafnium-Modified Polysilazanes for Ceramic Matrix Minicomposites. ACS Omega 7, 49, 45325–45335 (2022). LINK

  19. SS Lokesh Vendra*, G. Singh, and R. Kumar. Single source precursor-derived SiOC/TiOxCy as an anode component for Li-ion batteries. International Journal of Applied Ceramic Technology (2022). LINK

  20. P. A. Loughney, S. B. Mujib*, T. L. Pruyn, G. Singh, K. Lu, and   V. Doan-Nguyen. Enhancing Organosilicon Polymer-Derived Ceramic Properties Journal of Applied Physics 132, 070901 (2022). LINK

  21. G. Leonel, S. Bin-Mujib*, G. Singh and A. Navrotsky. Thermodynamic stabilization of crystalline silicon carbide polymer derived ceramic fibers. International Journal of Ceramic Engineering & Science (2022) Just Accepted. LINK

  22. C.G. Real*, E.H.N.S. Thaines, L.A. Pocrifka, R.G. Freitas, G. Singh, H. Zanin. Freestanding niobium pentoxide-decorated multiwalled carbon nanotube electrode: Charge storage mechanism in sodium-ion pseudocapacitor and battery. Journal of Energy Storage 52, 104793 (2022). LINK 

  23. S. Dey, S. B-Mujib*, and G Singh. Enhanced Li-Ion Rate Capability and Stable Efficiency Enabled by MoSe2 Nanosheets in Polymer-Derived Silicon Oxycarbide Fiber Electrodes. Nanomaterials 12 (3), 553 (2022). LINK

  24. H. Tetik, J. Orangi, G. Yang, K. Zhao, S. B-Mujib, G. Singh, M. Beidaghi, and D. Lin. 3D Printed MXene Aerogels with Truly 3D Macrostructure and Highly Engineered Microstructure for Enhanced Electrical and Electrochemical Performance. Advanced Materials 2104980 (2021). LINK

  25. S. Bin-Mujib* and G. Singh. Polymer derived SiOC and SiCN ceramics for electrochemical energy storage: A perspective. International Journal of Ceramic Science & Engineering (2021). LINK

  26. S. Bin-Mujib, Francois Ribot, Christel Gervais, and G. Singh*. Self-supporting Carbon-rich SiOC Ceramic Electrodes for Lithium-ion Batteries and Aqueous Supercapacitors. RSC Advances (2021). LINK

  27. D. Soares* and G. Singh. Weyl Semimetal Orthorhombic Td-WTe2 as an Electrode Material for Sodium-and Potassium-Ion Batteries. Nanotechnology, 32, 50, 5402 (2021). LINK

  28. D. Soares*, Z. Ren*, S. Mujib, S. Mukherjee, C. Real*, M. Anstine*, H. Zanin, and G. Singh. Additive Manufacturing of Electrochemical Energy Storage Systems Electrodes. Advanced Energy and Sustainability Research, p.2000111 (2021). LINK

  29. Z. Ren, S. Bin-Mujib, and G. Singh*. High-Temperature Properties and Applications of Si-Based Polymer-Derived Ceramics: A Review. Materials 14 (3), 614 (2021). 

  30. Z. Ren, C. Gervais, and G. Singh*. Fabrication and Characterization of Silicon Oxycarbide Fiber-mats via Electrospinning for High Temperature Applications. Royal Society of Chemistry RSC-Advances 10, 38446-38455 (2020). LINK

  31. S. Mujib, Z. Ren, S. Mukherjee, D. Soares and G. Singh*. Design, Characterization, and Application of Elemental 2D Materials for Electrochemical Energy Storage, Sensing, and Catalysis. Materials Advances, Royal Society of Chemistry 1, 2562-2591 (2020). LINK

  32. D. Soares and G. Singh*. Superior Electrochemical Performance of Layered WTe2 as Potassium-ion Battery Electrode. Nanotechnology 31, 45, (2020). LINK

  33. D. Soares, S. Mukherjee and G. Singh*. TMDs beyond MoS2 for Electrochemical Energy Storage. Chemistry - A European Journal  26, 6320 –6341 (2020). LINK

  34. S. Mujib, S. Mukherjee, Z. Ren, and G. Singh*. Assessing Corrosion Resistance of 2D Nanomaterial-based Coatings on Stainless Steel Substrates. Royal Society Open Science (2020). Just accepted. LINK

  35. D. Soares, and G. Singh*. SiOC functionalization of MoS2 as a means to improve stability as sodium-ion battery anode, Nanotechnology, 31, 14, (2020). LINK

  36. S. M. Kolathodi, M. Palei, T. S. Natarajan, G. Singh*. MnO2 Encapsulated Electrospun TiO2 Nanofibers as Electrodes for Asymmetric Supercapacitors, Nanotechnology, 31, 12 (2020). LINK

  37. S. Bin-Mujib, B. Vessalli, W. Bizzo, T. Mazon, G. Singh. Cassava and Bamboo Derived Carbons with Higher Degree of Graphitization for Energy Storage. Article number: NME-D-19-00040R1, Nanomaterials and Energy Journal, 9, 1, (2020). LINK

  38. S. Bin-Mujib, R. Cuccato, S. Mukherjee, G. Franchin, P. Colombo, and G. Singh. Electrospun SiOC Ceramic Fiber Mats as Freestanding Electrodes for Electrochemical Energy Storage Applications, Ceramics International, (2019) LINK. 

  39. Z. Ren, C. Gervais, and G. Singh. Preparation and Structure of SiOCN Fibers Derived from Cyclic Silazane/PAA Hybrid Precursor. Royal Society Open Science, Published: 02 October 2019 https://doi.org/10.1098/rsos.190690

  40. S. Mukherjee, J. Turnley, E. Mansfield, J. Holm, D. Soares, L. David, and G. Singh*. Exfoliated transition metal dichalcogenide nanosheets for supercapacitor and sodium ion battery applications. Royal Society Open Science,https://doi.org/10.1098/rsos.190437 (2019). 

  41. D. Sarkar, J. Brady, M. G. Baboly, L. Xu, G. Singh, and   Z. C. Leseman. 1D thermal characterization of micro/nano-cantilevers for Suspended ThermoReflectance measurements. AIP Advances 9, 085315; https://doi.org/10.1063/1.5115512(2019).

  42. S. Mukherjee, S. B. Mujib, D. Soares and G. Singh*. Electrode Materials for High-Performance Sodium-Ion Batteries. Materials, 12(12), 1952; https://doi.org/10.3390/ma12121952 (2019).

  43. S. Mukherjee, and G. Singh*. Two-Dimensional Anode Materials for Emerging Metal-Ion Batteries. ACS Appl. Energy Materials, 2 (2), 932-955 (2019).

  44. S. Mukherjee, Z. Ren, and G. Singh*. Beyond Graphene Anode Materials for Emerging Metal Ion Batteries and Supercapacitors. Nano-Micro Letters, 10 (4): 70 (2018).

  45. S. Mukherjee, Z. Ren, and G. Singh*. Molecular polymer-derived ceramics for applications in electrochemical energy storage devices. Journal of Physics D: Applied Physics, https://doi.org/10.1088/1361-6463/aadb18 (2018). 

  46. M. A. Abass, A. A. Syed, C. Gervais, and G. Singh*. Synthesis and Electrochemical Performance of Polymer-derived Silicon Oxycarbide/Boron Nitride Nanotube Composite. RSC Advances, 7, 21576-21584 (2017). 

  47. L. David, R. Bhandavat, U. Barrera, and G. Singh*. Silicon Oxycarbide Glass-Graphene Composite Paper Electrode for Long-Cycle Lithium-ion Batteries. Nature Communications, 7, Article number: 10998 doi:10.1038/ncomms10998 (2016).

  48. M. S. Kolathodi, L. David (equal contribution), M. A. Abass, and   G. Singh*. Polysiloxane-Functionalized Graphene Oxide Paper: Pyrolysis and Performance as a Li-Ion Battery and Supercapacitor Electrode. RSC Advances 6, 74323 (2016).

  49. M. S. Kolathodi, S. N. H. Rao, T. S. Natarajana, and G. Singh. Beaded Manganese Oxide (Mn2O3) Nanofibers: Preparation and Application for Capacitive Energy Storage. Journal of Materials Chemistry A, DOI: 10.1039/c6ta01948j (2016).

  50.  L. David, M. S. Kolathodi, M. A. Abass, and   G. Singh*. Three-dimensional Polymer-derived Ceramic/Graphene Paper as a Li-ion Battery and Supercapacitor Electrode. RSC Advances, Issue 59 (2016).

  51. L. David, R. Bhandavat, U. Barrera, and G. Singh*. Polymer-Derived Ceramic Functionalized MoS2 Composite Paper as a Stable Lithium-ion Battery Electrode. Scientific Reports (Nature Publishing Group) Article number: 9792 doi:10.1038/srep09792 (2015). 

  52. L. David, S. Bernard, C. Gervais, P. Miele, and G. Singh*. Facile Synthesis and High Rate Capability of Silicon Carbonitride/Boron Nitride Composite with a Sheet-Like Morphology. Journal of Physical Chemistry-C, DOI: 10.1021/jp508075x (2015).

  53. L. David, and G. Singh*. Reduced Graphene Oxide Paper Electrode: Opposing Effect of Thermal Annealing on Li and Na Cyclability. Journal of Physical Chemistry-C, 118 (49), pp 28401–28408 (2014).

  54. L. David, R. Bhandavat, and G. Singh*. Large Area MoS2/graphene Composite Paper Based Electrode for Room Temperature Na-ion Batteries: Electrochemical and Mechanical Characterization. ACS Nano, 8 (2), pp 1759–1770 (2014).

  55. L. David, A. Feldman, E. Mansfield, J. Lehman, and G. Singh*. Evaluating Thermal Damage Resistance of Graphene/Carbon Nanotube Hybrid Composite Coatings. Scientific Reports (Nature Publishing Group) 4, Article number: 4311 (2014).

  56. L. David, D. Asok, and G. Singh*. Synthesis and Extreme Rate Capability of Si–Al–C–N Functionalized Carbon Nanotube Spray-on Coatings as Li-Ion Battery Electrode. ACS-Applied Materials & Interfaces, DOI: 10.1021/am5052729 (2014).

  57. L. David, R. Bhandavat, G. Kulkarni, S. Pahwa, Z. Zhong and G. Singh*. Synthesis of Graphene Films by Rapid Heating and Quenching at Ambient Pressures and their Electrochemical Characterization. ACS- Applied Materials & Interfaces 5 (3), 546–552 (2013). Highlighted in R&D magazine, ChemViews, and IEEE Spectrum magazine.

  58. R. Bhandavat and G. Singh*. Stable and Efficient Li-Ion Battery Anodes Prepared from Polymer-Derived Silicon Oxycarbide–Carbon Nanotube Shell/Core Composites. The Journal of Physical Chemistry C, 117 (23), 11899–11905 (2013).

  59. R. Bhandavat, A. Feldman, C. Cromer, J. Lehman and G. Singh*. Very High Laser-Damage Threshold of Polymer-Derived Si(B)CN- Carbon Nanotube Composite Coatings. ACS- Applied Materials & Interfaces 5 (7), 2354–2359 (2013). Highlighted in NIST Technical Beat, Ceramic Tech Today, and Laser World Focus.

  60. R. Bhandavat, and G. Singh*. Improved Electrochemical Capacity of Precursor-Derived Si(B)CN-Carbon Nanotube Composite as Li-Ion Battery Anode. ACS- Applied Materials & Interfaces 4 (10), 5092–5097 (2012).

  61. R. Bhandavat, L. David and G. Singh*. Synthesis of Surface Functionalized WS2 Nanosheets and Performance as Li-Ion Battery Anode. Journal of Physical Chemistry Letters 3 (11), 1523–1530 (2012). Highlighted in Science Daily, PhysOrg, Azo-Nano, ChemViews, and IEEE Spectrum magazine.

  62. R. Bhandavat and G. Singh*. Synthesis, Characterization and High Temperature Stability of Si(B)CN Coated Carbon Nanotubes Using a Boron-Modified Poly(Ureamethylvinyl)Silazane Chemistry. Journal of the American Ceramic Society 95 (5), 1536–1543 (2012).

  63. R. Bhandavat, W. Kuhn, E. Mansfield, J.H. Lehman and G. Singh*. Synthesis of Polymer-Derived Ceramic Si(B)CN-Carbon Nanotube Composite by Microwave Induced Interfacial Polarization. ACS Applied Materials & Interfaces 4 (1), 11–16 (2012). Highlighted on NSF-site, Local newspapers, and Science Daily.

  64. G. Singh*, A. Slifka, P. Rice, D. Lauria and R. L. Mahajan. Optical Trapping in Air of an Individual Nanotube-Sphere Device. Applied Physics Express 5 (9) Art: 095001 (2012).

  65. R. Bhandavat, M. Cologna and G. Singh*. Polymer-derived Ceramic SiOC–CNT Paper for use in Lithium-Ion Batteries. Nanomaterials and Energy Journal 1(1) 57-61, (2012).

  66. R. Bhandavat*, Z.J. Pei, and G. Singh. Polymer-derived Ceramics as Anode Material for Rechargeable Li-Ion Batteries: A Review. Nanomaterials and Energy Journal 1(6), 324 –337 (2012). 

  67. A.J. Slifka, G. Singh*, D.S. Lauria, P. Rice, and R.L. Mahajan. Observations of Nanobubble Formation on Carbon Nanotubes. Applied Physics Express 3 (6) Art: 065103 (2010). Also selected for the Virtual Journal of Nanoscale Science & Technology.

  68. J.H. Lehman*, K.E. Hurst, G. Singh, E. Mansfield, J.D. Perkins, and C.L. Cromer. Core–Shell Composite of SiCN and Multiwalled Carbon Nanotubes from Toluene Dispersion. Journal of Materials Science 45, 4251–4254 (2010). 

  69. J. Zhang, J. Ge, M. Shultz, E. Chung, G. Singh, C. Shu, P. Fatouros, S. Henderson, F. Corwin, D. Geohegan, A. Puretzky, C. Rouleau, K. More, C. Rylander, M. Rylander, H. Gibson and H. Dorn*. In Vitro and In Vivo Studies of Single-Walled Carbon Nanohorns with Encapsulated Metallofullerenes and Exohedrally Functionalized Quantum Dots. Nano Letters 10 (8), 2843–2848 (2010). 

  70. V. Bedekar, G. Singh*, R.L. Mahajan, and S. Priya. Synthesis and Microstructural Characterization of Barium Titanate Nanoparticles Decorated SiCN-MWCNT Nanotubes – “nanoNecklace”. Ferroelectrics Letters Section, 36(5-6), 133-140 (2009). 

  71. G. Singh*, S. Priya, M. Hossu, S.R. Shah, S. Grover, Ali R Koymen, and R.L. Mahajan. Synthesis, Electrical and Magnetic Characterization of Core-Shell Carbon Nanotube – SiCN nanowires. Materials Letters, 63(28), 2435-2438 (2009). 

  72. G. Singh*, P. Rice, R.L. Mahajan, and J.R. McIntosh. Fabrication and Characterization of a CNT Based Nano-Knife. Nanotechnology, 20, 095701 (2009). 

  73. M. Karmarkar, G. Singh, S. Shah, R.L. Mahajan, and S. Priya*. Large Piezoresistivity Phenomenon in SiCN – (La,Sr)MnO3Composites. Applied Physics Letters, 94, 072902 (2009). Selected for the Virtual Journal of Nanoscale Science & Technology. 

  74. J.J. Brown*, J.W. Suk, G. Singh, A.I. Baca, D.A. Dikin, R.S. Ruoff, and V.M. Bright. Microsystem for Nanofiber Electromechanical Measurements. Sensors and Actuators A: Physical, 155(1), 1-7 (2009). 

  75. T. Dennis*, S. Dyer, A. Dienstfrey, G. Singh, and P. Rice. Analyzing Quantitative Light Scattering Spectra of Phantoms Measured with Optical Coherence Tomography. Journal of Biomedical Optics, 13, 024004 (2008). Also selected for the Virtual Journal of Nanoscale Science & Technology.

  76. G. Singh*, P. Rice, and R. L. Mahajan. Fabrication and Mechanical Characterization of a Force Sensor Based on an Individual Carbon Nanotube. Nanotechnology 18, 475501 (2007). Among most downloaded articles: across all IOP journals only ten percent of articles were accessed over 250 times in the quarter, 2007.

  77. G. Singh*, P. Rice, K. Hurst, J. Lehman, and R.L. Mahajan. Laser-Induced Exfoliation of Amorphous Carbon Layer on an Individual Multiwall Carbon Nanotube. Applied Physics Letters, 91, 033101 (2007). Selected for the Virtual Journal of Nanoscale Science & Technology and featured in nanotechweb.org. 

  78. G. Singh, Y. Yu, F. Ernst, and R. Raj*. Shear Strength and Sliding at a Metal–Ceramic (Aluminum–Spinel) Interface at Ambient and Elevated Temperatures. Acta Materialia, 55 (9), 3049-3057 (2007). 

ARTICLES PUBLISHED IN PEER-REVIEWED CONFERENCE PROCEEDINGS

1.     R. Bhandavat, L. David, U. Barrera and G. Singh. Large-Scale Synthesis of MoS2-Polymer Derived SiCN Composite Nanosheets. Ceramic Transactions (2012).

2.     V. Bedekar, G. Singh, R.L. Mahajan and S. Priya. Barium Titanate and Cobalt Ferrite Nano-Particles Decorated SiCN/MWCNT Nanotubes: Synthesis and Microstructural Characterization. Ceramic Transactions (2010).

3.     J.J. Brown, J.W. Suk, G. Singh, D.A. Dikin, R.S. Ruoff, and V.M. Bright. Microsystem for Electromechanical Measurements of Carbon Nanofiber Loading and Failure. A Solid-State Sensors, Actuators and Microsystems Workshop, Hilton Head Island, SC 29928 (2008).

4.     G. Singh, P. Rice, J. R. McIntosh and R. L. Mahajan. Fabrication and Mechanical Characterization of Carbon Nanotube Based Nanoknives. IMECE2006-14659. IMECE proceedings, Chicago, Illinois USA (2006).

PATENTS APPLICATIONS/INVENTION DISCLOSURES 

1.     L. David, and G. Singh. Robust MoS2/graphene Composite for Na+ Battery Application; U.S. Patent No. 10,950,850, issued March 16, 2021.

2.     L. David, R. Bhandavat and G. Singh. Flexible Silicon oxycarbide Graphene Composite Electrodes for High Rate Performance Lithium-ion Batteries; U.S. Patent No. 10,553,853 issued on Feb. 4, 2020

3.     L. David, and G. Singh. Aluminum-Modified Polysilazanes for Polymer-Derived Ceramic Nanocomposites; U.S. Patent No. 9,908,905, issued March 6, 2018.

4.     R. Bhandavat, and G. Singh. Boron-Modified Silazanes for Synthesis of SiBNC Ceramics; United States Patent No. 9,453,111, issued on September 27, 2016.

5.     L. David, and G. Singh. Silicon-Based Polymer-Derived Ceramic Composites Comprising h-BN Nanosheets, United States Patent No. US10093584B2, issued on October 09, 2018.

6.     G. Singh. U.S. Provisional Patent Application No. 62/219,545-Transitional Metal Dichalcogenides Functionalized with Polymer-Derived Ceramic and Uses Thereof; Filed September 16, 2015; Docket No. 47555-PRO.

7.     G. Singh and R.L. Mahajan. Virginia Tech Intellectual Property; Spray Coatings of Polymer Derived SiCN Particles, April 2009. (Invention disclosure).

BOOKS CO-EDITED

1.     Processing, Properties, and Design of Advanced Ceramics and Composites: Ceramic Transactions, Volume 259, John Wiley & Sons, ISBN: 978-1-119-32364-8

2.     Processing and Properties of Advanced Ceramics and Composites VII: Ceramic Transactions, Volume 252, John Wiley & Sons, ISBN: 978-1-119-18387-7

3.     Processing and Properties of Advanced Ceramics and Composites VI: Ceramic Transactions, Volume 249, John Wiley & Sons, ISBN: 978-1-118-99549-5.

4.     Processing and Properties of Advanced Ceramics and Composites V: Ceramic Transactions, Volume 240, John Wiley & Sons, ISBN: 978-1-118-74409-3

5.     Advances in Nanomaterials and Nanostructures: Ceramic Transactions, Volume 229. John Wiley & Sons, ISBN: 978-1-1180-6002-5.

INVITED BOOK CHAPTERS

1.     D. Soares, S. Mukherjee, and G. Singh*. Transition metal dichalcogenides as active anode materials for sodium-ion batteries. Book Title: Handbook of Sodium-Ion Batteries: Materials and Characterisation, Publisher: Jenny Stanford Publishing, Publication Date: December 2020.

2.     Z. Ren, S. Mukherjee, and G. Singh*. Graphene Based Hybrid Materials for Advanced Batteries. Book Title: 2Dl Nanomaterials for Energy Applications, Publisher: Elsevier, Publication Date: Sept. 2019.

PRESENTATIONS AND INVITED TALKS 

​

  1. G. Singh. iConFIRM 2023: International Conference on Fundamental and Industrial Research in Materials, India. December 12- 14, 2023. (Plenary Lecture).

  2. S. Dey and G. Singh. Enhancing Sodium and Potassium-Ion Storage in 2D MoWSe2: Effect of Upper Voltage Cut-Off. MRS Fall meeting, Boston. EN06.10.04. December 2023. (Poster)

  3. S. Dey and G. Singh. Investigating Na+ Ion Storage Behavior of Distinctive Hybrid Structure of WS2NT Encapsulated SiOC Fibers. IMECE 2023, Oct 29-Nov 2, 2023. (Oral).

  4. S. Dey and G. Singh. Exploring Na+ and K+ Ion Storage Behavior of WS2 Nanosheet- Loaded SiOC Fiber Structures. IMECE 2023, Oct 29-Nov 2, 2023. (Poster).

  5. S. Bin-Mujib, S.R. Arunachalam and G. Singh. In-Depth Spectroscopic Study of Hafnium Carbide for Extreme Environments. IMECE 2023, Oct-Nov 2023. (Poster).

  6. S. Bin-Mujib, M. Rasheed and G. Singh. Assessing the High-Temperature Suitability of SiC Fiber-Reinforced Quaternary Ceramic Matrix Composites. IMECE 2023, Oct-Nov 2023. (Poster).

  7. S. Dey, S. Bin-Mujib, and G. Singh. Polymer-derived ceramic paper-like electrodes for multifunctional alkali-metal ion batteries. SES 2023; Oct 8-11, 2023. (Poster).

  8. S. Bin-Mujib, and G. Singh. SiC Fiber-reinforced CMCs: Towards High-temperature Structural Materials. MS&T 23: Materials Science and Technology, October 2023. (Poster).

  9. S. Bin-Mujib, S.R. Arunachalam and G. Singh. Synthesis of High-Temperature Ceramics Based on Hafnium Carbide from a Precursor. MS&T 23: Materials Science and Technology, October 2023 (Poster).

  10. S. Bin-Mujib, M. Rasheed and G. Singh. Improved Electrochemical Properties of SiOC Composite for High Li Storage. MS&T 23: Materials Science and Technology, October 2023. (Poster).

  11. S. Dey and G. Singh. Na+ ion storage behavior of WS2 nanotube encapsulated polymer derived SiOC fibers: Preservation of structural integrity and enhancement of cycling stability. ACS Fall 2023, August 13-17, 2023. (Poster).

  12. S. Dey and G. Singh. Tailoring WS2 nanosheets in SiOC fiber matrix for stable and efficient Na+ and K+ ion storage for next generation rechargeable batteries. ACS Fall 2023, August 13-17, 2023. (Oral).

  13. S. Dey and G. Singh. Investigating Na+ ion Storage Behavior of WS2NT Encapsulated SiOC Fibers. MS&T 23: Materials Science and Technology, August 13-17, 2023. (Poster).

  14. S. Dey and G. Singh. Investigation of Sodium and Potassium Ion Storage Behavior of WS2 Nanosheet Loaded Polymer Derived SiOC Fibers. MS&T 23: Materials Science and Technology, August 13-17, 2023. (Oral).

  15. S. Dey, A. Roy, G. Singh. Regulating Na+ and K+ Ion Storage into TMD Alloys: Effect of Upper Voltage Cut-off Technique. MS&T 23: Materials Science and Technology, August 13-17, 2023. (Poster).

  16. S. Bin-Mujib, Arunachalam SR and G. Singh. A Comprehensive Study of HfC Ceramics Derived from a Precursor: Synthesis and Characterization. ACS Fall 2023, August 2023. (Poster).

  17. S. Bin-Mujib, M. Rasheed and G. Singh. Pushing the Limits of SiOC Anode Materials: Improved Electrochemical Performance through Precursor-Derived Synthesis. ACS Fall 2023, August 2023. (Poster).

  18. G. Singh. International Symposium on Inorganic and Environmental Materials-ISIEM 2023 conference, Montpellier, France. June 19- 23, 2023. (Keynote Lecture).

  19. S. Bin-Mujib and G. Singh. Microstructure and evolution characteristics of HfC ceramics derived from a commercial precursor. PIRE PDC MATCOM-COMMAT Workshop 2023, Austria, June 2023. (Oral).

  20. M. Rasheed, S. Bin-Mujib and G. Singh.  Assessment of Polymer-derived Quaternary CMCs. PIRE PDC MATCOM-COMMAT Workshop 2023, Austria, June 2023. (Oral).

  21. S. Dey and G. Singh. WS2 Nanotube Embedded SiOC Fibers. PIRE PDC MatCom-ComMat Workshop 2023; April 14, 2023. (Oral).

  22. S. Dey and G. Singh. Magnifying Rate Capability and Efficiency of Li-Ion Storage Mechanism via Next-Generation Standalone Electrodes Enabled by MoSe2 Nanosheets in SiOC High Aspect Ratio Structures. MRS Spring 2023, April 14, 2023. (Oral).

  23. S. Dey and G. Singh. Distinctively Structured WS2 Nanotubes Embedded in SiOC Fibers for High-Rate Sodium Ion Storage. MRS Spring 2023, April 14, 2023. (Oral).

  24. M. Rasheed, S. Bin-Mujib and G. Singh.  Assessment of Precursor-Derived Quaternary Ceramic Matrix Composites: Toward Lightweight, High-Temperature, and High-Strength Structural Materials. NSMMA and CRASTE 2023, April 2023. (Poster).

  25. S. Bin-Mujib and G. Singh. Enabling High Performance Potassium Storage in Ceramic Structures by Dual Salt Electrolyte. MRS Spring Meeting & Exhibit 2023, April 2023. (Poster).

  26. G. Singh. Precursor derived ceramics: Fibers, Composites and Electrodes for Batteries. Materials Science and Engineering department seminar, Texas A&M University, April 2023. (Invited) (Oral).

  27. G. Singh. Silicon-based Precursor Derived Ceramics: From Fibers and Composites to Electrodes for Batteries​, Arizona State University, March 2023. (Invited) (Oral).

  28. G. Singh. Silicon-based precursor derived ceramics: From Fibers and Composites to Electrodes for Beyond Li+ Batteries. Recent Advances in Precursor Derived Ceramics: Innovations and Translational Research (PDC-IT), IIT Madras. Indo-German Science and Technology Center Workshop (IGSTC), March 2023. (Invited) (Oral). 

  29. S. Dey, S. Bin-Mujib and G. Singh. “On the performance of polymer derived ceramic nano-composites in sodium and potassium-ion half cells”. 47th International Conference and Expo on Advanced Ceramics and Composites, ICACC, Daytona Beach, FL, January 2023. (Invited) (Oral).

  30. G. Singh. "Molecular Precursor Derived Ceramics for Flexible Rechargeable Batteries". International Conference on Advanced Materials, Metallurgy and Manufacturing (ICAMMM-2022) held at PEC, Chandigarh, India, November 2022  (Keynote, virtual Oral)

  31. L. Vendra, G. Singh, NV Ravikumar. Insights into the electrochemical performance of multiphase SiOC/C/NbC/NbO2 for Li-ion batteries. International Symposium on Accelerated Materials Development and Additive Manufacturing: Scientific and Technological Perspectives (AMDAM) and the 76th Annual Technical Meeting of the Indian Institute of Metals at Hyderabad, India, November 2022. (Poster)

  32. S. Dey and G. Singh. Characterizing 2D Materials (Graphite, GO, and GNP) via Physical, Electrical and Electrochemical Techniques. MRS Fall 2022 Meeting, Boston, November 2022. (Poster)

  33. S. Dey and G. Singh. Electrochemical Impedance Spectroscopy as an Unconventional Tool for Differentiating Graphite, Graphene and Graphene Oxide. Paper Number: IMECE2022-99770. NSF Poster Presentation. IMECE 2022, Columbus, Ohio, November 2022. (Poster)

  34. G. Singh. “Building Self-supporting Battery Electrodes with Precursor-Derived Ceramics”. Department of Civil Engineering, Kansas State University, September 2022 (Invited) (Oral).

  35. G. Singh. “New opportunities for silicon-based polymer derived ceramics in beyond Li+ batteries”. Symposium O: Circular materials and resource chemistry. European-MRS Fall Meeting, September 2022, Warsaw, Poland. (Invited) (virtual Oral).

  36. S. Dey and G. Singh. Building Better Lithium-ion Battery Anodes with Enhanced Capability and Cycling Efficiency Using MoSe2/SiOC Freestanding Structure Symposium: Controlled Synthesis, Processing, and Applications of Structural and Functional Nanomaterials. MS&T 22: Materials Science and Technology. Pittsburgh, PA, October 2022. 

  37. S. Mujib and G. Singh. Ceramic fibers derived from organosilicon polymers for energy storage. (IMECE2022-99883), ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022), October 2022. (Poster)

  38. M. Rasheed, S. Mujib, and G. Singh. Fabrication and Testing of Polymer-Derived Non-Oxide Ceramic Matrix Composite Materials. (IMECE2022-99126), ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022), October 2022. (Poster)

  39. S. Mujib, S. Dey, and G. Singh. Lithium Storage Capacity of Carbon-rich Polymer-derived Ceramic Electrodes. MS&T22: Materials Science & Technology, October 2022. (Poster)

  40. S. Mujib, M. Rasheed, and G. Singh. Carbon fiber-reinforced CMCs for ultra-high temperature applications. MS&T22: Materials Science & Technology, October 2022. (Poster)

  41. S. Mujib and G. Singh. Free-standing polymer-derived ceramic fibers for high-capacity Li storage. MSE Congress, Darmstadt, Germany, September 2022. Virtual (Poster)

  42. S S Lokesh Vendra, NV Ravikumar, and G. Singh. Improved electrochemical performance of Ti modified amorphous silicon oxycarbide (Si(Ti)OC) from pyrolysis of a single source precursor. MSE Congress, Darmstadt, Germany, September 2022. (Keynote presentation)

  43. S. Mujib, M. Rasheed, and G. Singh. Carbon fiber-reinforced SiCN CMCs for high-temperature applications. MSE Congress, Darmstadt, Germany, September 2022. Virtual (Poster)

  44. S. Dey and G. Singh. Lithium-ion Battery Anode with High-Rate Capability and Stable Cycling Efficiency enabled by MoSe2 Nanosheets in Polymer Derived Ceramic Matrix. P05: Molecular Preparative Approaches to Functional Materials MSE Congress, Darmstadt, Germany, September 2022. Virtual (Poster)

  45. S. Dey and G. Singh. NM01.26.09 Electrochemical Impedance Spectroscopy as an Unorthodox Tool for Discerning Graphite, Graphene and Graphene Oxide. 2022 MRS Spring Meeting & Exhibit, Virtual, May 2022. (Poster)

  46. S. Dey and G. Singh. EN05.22.07. Augmenting the Rate Capability and Efficiency of Battery Anodes by Fabrication of MoSe2/SiOC Self-Supported Structure. 2022 MRS Spring Meeting & Exhibit, Virtual, May 2022. (Poster)

  47. S S Lokesh Vendra, G. Singh and NV Ravikumar. EN05.23.04. First Intuition of Rate Capability Performance of Multiphase SiOC/C/NbC/Nb2O5 Anode Material for Battery Applications. 2022 MRS Spring Meeting & Exhibit, Virtual, May 2022. (Poster)

  48. S S Lokesh Vendra, G. Singh and NV Ravikumar. EN05.22.09. Titania in Amorphous Silicon Oxycarbide Phase as a Competent Anode Material. 2022 MRS Spring Meeting & Exhibit, Virtual, May 2022. (Poster)

  49. S. Bin-Mujib and G. Singh. EN05.22.07. Precursor-Derived C-Rich SiOC as Self-Supporting Electrodes. 2022 MRS Spring Meeting & Exhibit, Virtual, May 2022. (Poster)

  50. C. Real, G. Singh, and H. Zanin. Niobium pentoxide decorated multi-walled carbon nanotube electrode material for sodium-ion electrochemical energy storage devices (ICACC-P016-2022), 46th International Conference and Exposition on Advanced Ceramics and Composites. Virtual-poster, January 2022. (Poster).

  51. S. Mujib, C. Gervais, and G. Singh. Self-supporting Carbon-rich SiOC Ceramic Electrodes for Lithium-ion Batteries and Aqueous Supercapacitors. (ICACC-P015-2022), 46th International Conference and Exposition on Advanced Ceramics and Composites. Virtual-poster, January 2022. (Poster).

  52. S. Mujib, M. Anstine, C. Gervais, and G. Singh. Carbon rich-polymer derived ceramic fibers and mats for rechargeable batteries and supercapacitors (Invited). (ICACC-106-2022), 46th International Conference and Exposition on Advanced Ceramics and Composites. Virtual, January 2022. (Oral).

  53. S. Dey and G. Singh. Transition Metal Dichalcogenides Reinforced SiOC Fibermats for Rechargeable Battery Electrodes. ACers 14th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 14) & 2021 Glass and Optical Materials Division (GOMD) Annual Meeting December 2021. (Poster)

  54. S. Dey and G. Singh. Stable Electrode Materials for Alkali Metal-Ion Batteries: Silicon Oxycarbide Functionalized Transition Metal Dichalcogenides. International Mechanical Engineering Congress & Exposition. Virtual, November 2021. (Poster)

  55. S. Dey and G. Singh. Freestanding SiOC Functionalized MoS2 Fibermat Electrode for Lithium-ion Battery. ACS Fall 2021, Virtual, August 2021. (Poster)

  56. S. B. Mujib and G. Singh. SiOC Functionalized Transition Metal Monochalcogenides as Electrodes for Beyond Lithium-ion Batteries. EN12.19.08. 2021 MRS Fall Meeting & Exhibit, Virtual, November 2021. (Poster)

  57. C.G. Real, G. Singh and H. Zanin. Flexible and Freestanding Carbon Nanotube and Niobium Pentoxide Composite for Sodium Electrochemical Energy Storage with Intercalation Pseudocapacitance. EN12.19.12. 2021 MRS Fall Meeting & Exhibit, Virtual, November 2021. (Poster)

  58. C.G. Real, G. Singh and H. Zanin. Sn Nanoparticles and Nitrogen-Doped Activated Carbon Nanofiber Composite as Anode for Sodium-Ion Batteries. EN12.19.13. 2021 MRS Fall Meeting & Exhibit, Virtual, November 2021. (Poster)

  59. S. B. Mujib and G. Singh. Layered Metal Monochalcogenides as Electrodes for Electrochemical Energy Storage Applications. MS&T21, Virtual, October 2021. (Poster)

  60. S. B. Mujib and G. Singh. Fabrication of SiOC Fibermats via Electrospinning and their Applications in Energy Storage Systems. MS&T21, Virtual, October 2021. (Poster)

  61. S. B. Mujib and G. Singh. Synthesis of Polymer Derived SiOC Ceramic Fibermats for Energy Storage Systems. ACS Fall 2021, Virtual, August 2021. (Poster)

  62. S. Bin-Mujib, M. Ellis, P. Herold, and G. Singh. Transition Metal Monochalcogenides as Anodes for Metal- Ion Batteries. 2021 MRS Spring Meeting & Exhibit, Virtual, April 2021. (Poster)

  63. D. Soares and G. Singh. Polymer-derived ceramics functionalization of molybdenum disulfide towards electrochemical stability of sodium-ion battery electrode. ICACC Symposium 6 – ID: 3479347, 45th International Conference and Exposition on Advanced Ceramics and Composites. February 2021. (Contributed Oral)

  64. D. Soares and G. Singh. Layered tungsten-based dichalcogenides as potassium-ion battery electrodes. Oral Presentation. ICACC Symposium 6 – ID: 3479338. 45th International Conference and Exposition on Advanced Ceramics and Composites. February 2021. (Contributed Oral)

  65. S. Bin-Mujib, M. Ellis, P. Herold, and G. Singh. Transition Metal Monochalcogenides for Rechargeable Metal-ion Battery Anodes. 45th International Conference and Exposition on Advanced Ceramics and Composites (ICACC2021), Virtual, February 2021. (Poster)

  66. S. Bin-Mujib, M. Ellis, P. Herold, and G. Singh. Transition Metal Monochalcogenides as Anodes for Metal-Ion Batteries. 2021 MRS Spring Meeting & Exhibit, Virtual, April 2021. (Poster)

  67. D. Soares and G. Singh. Silicon carbon nitride (SiCN) and silicon oxycarbide (SiOC) functionalization of molybdenum disulfide (MoS2) as stable battery electrodes. Materials Science & Technology 2020 Technical Meeting & Exhibition (MS&T20), Virtual, November 2020. (Poster)

  68. D. M. Soares, C. Shuck, N. Kurra, Y. Gogotsi and G. Singh. MXene nanosheets as active materials for nonaqueous monovalent-ion battery electrodes. MRS Spring/Fall Meeting & Exhibit. Virtual, December 2020. (Poster)

  69. S. Bin-Mujib, M. Ellis, S. Justus, P. Herold, and G. Singh. Germanium Monochalcogenide Nanosheets as Anode in Metal-ion Batteries. Materials Science & Technology 2020 Technical Meeting & Exhibition (MS&T20), Virtual, November 2020. (Poster)

  70. S. Bin-Mujib, M. Ellis, P. Herold, and G. Singh. Transition Metal Monochalcogenides as Anodes for Metal-Ion Batteries. The International Mechanical Engineering Congress and Exposition (IMECE 2020), Virtual, November 2020. (Poster)

  71. S. Bin-Mujib, M. Ellis, S. Justus, P. Herold, and G. Singh. Two-Dimensional Layered Germanium Monochalcogenides as Anode in Metal-Ion Batteries. Materials Research Society (MRS) Spring/Fall Meeting & Exhibit, Virtual, November 2020. (Poster)

  72. Z. Ren, M. Ellis, P. Herold, M. Holthaus, and G. Singh. Fabrication and Characterization of High Temperature Silicon Oxycarbideelectrospun SiOC Fiber-Mats via Electrospinning of Polyvinylpyrrolidone/preceramic Siloxanes Hybrid Systems. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  73. Z. Ren, P. Herold, S. Mujib, and G. Singh. Graphene-Reinforced Polymer Derived Ceramic Carbon Fibers. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  74. D. M. Soares, C. Shuck, N. Kurra, Y. Gogotsi and G. Singh. Mo2TiC2 and Mo2Ti2C3 MXene Nanosheets as Electrode Materials for Sodium and Potassium Ion Batteries. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  75. M. Ellis, Z. Ren, S. Mujib, and G. Singh. UV-Assisted 3d Printing of PDC Fiber Reinforced Polymer Matrix Composite. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  76. D. M. Soares and G. Singh. WTe2, a semimetal transition metal dichalcogenide electrode for potassium-ion batteries. MRS Spring/Fall Meeting & Exhibit. Virtual, December 2020 (Oral)

  77. S. Bin-Mujib, M. Ellis, S. Justus, P. Herold, and G. Singh. Germanium Monochalcogenide: Two-dimensional Layered Anode for Metal-ion Batteries. ACS Fall 2020 National Meeting & Exposition. Virtual, August 2020. (Poster)

  78. S. Bin-Mujib, M. Ellis, S. Justus, P. Herold, and G. Singh. Germanium Monochalcogenide Nanosheets as Anode in Metal-ion Batteries. Materials Science & Technology 2020 Technical Meeting & Exhibition (MS&T20), Virtual, November 2020. (Poster)

  79. S. Bin-Mujib, M. Ellis, P. Herold, and G. Singh. Transition Metal Monochalcogenides as Anodes for Metal-Ion Batteries. The International Mechanical Engineering Congress and Exposition (IMECE 2020), Virtual, November 2020. (Poster)

  80. S. Bin-Mujib, M. Ellis, S. Justus, P. Herold, and G. Singh. Two-Dimensional Layered Germanium Monochalcogenides as Anode in Metal-Ion Batteries. Materials Research Society (MRS) Spring/Fall Meeting & Exhibit, Virtual, November 2020. (Poster)

  81. Z. Ren, M. Ellis, and G. Singh. Fabrication and Characterization of High Temperature Silicon oxycarbide Electrospun SiOC Fiber-mats via Electrospinning of Polyvinylpyrrolidone/Preceramic Siloxanes Hybrid Systems. ACS Fall 2020 Virtual Meeting & Expo. Virtual, August 2020 (Poster)

  82. Z. Ren, M. Ellis, P. Herold, M. Holthaus, and G. Singh. Fabrication and Characterization of High Temperature Silicon Oxycarbideelectrospun SiOC Fiber-Mats via Electrospinning of Polyvinylpyrrolidone/preceramic Siloxanes Hybrid Systems. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  83. Z. Ren, P. Herold, S. Mujib, and G. Singh. Graphene-Reinforced Polymer Derived Ceramic Carbon Fibers. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  84. M. Ellis, Z. Ren, S. Mujib, and G. Singh. UV-Assisted 3d Printing of PDC Fiber Reinforced Polymer Matrix Composite. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  85. D. M. Soares and G. Singh. WTe2, a semimetal transition metal dichalcogenide electrode for potassium-ion batteries. MRS Spring/Fall Meeting & Exhibit. Virtual, December 2020 (Oral)

  86. D. M. Soares and C. Shuck and N. Kurra and Y. Gogotsi and G. Singh. MXene nanosheets as alkali metal-ion battery electrodes: initial studies. MXene Conference 2020. Virtual, August 2020 (Poster)

  87. D. M. Soares and C. Shuck and N. Kurra and Y. Gogotsi and G. Singh. MXene nanosheets as lithium, sodium-, and potassium-ion batteries: a fundamental study. ACS Fall 2020 Virtual Meeting & Expo. Virtual, August 2020 (Poster)

  88. D. M. Soares, S. Justus, P. Herold, M. Ellis and G. Singh. Polymer-derived ceramics functionalization of sulphur-based TMD for electrochemical stability of sodium-ion battery anode. ACS Fall 2020 Virtual Meeting & Expo. Virtual, August 2020 (Poster)

  89. D. M. Soares, C. Shuck, N. Kurra, Y. Gogotsi and G. Singh. Mo2TiC2 and Mo2Ti2C3 MXene Nanosheets as Electrode Materials for Sodium and Potassium Ion Batteries. International Mechanical Engineering Congress & Exposition. Virtual, November 2020. (Poster)

  90. D. M. Soares, C. Shuck, N. Kurra, Y. Gogotsi and G. Singh. MXene nanosheets as active materials for nonaqueous monovalent-ion battery electrodes. MRS Spring/Fall Meeting & Exhibit. Virtual, December 2020. (Poster)

  91. D. M. Soares and G. Singh. Polymer-derived ceramics functionalization of molybdenum disulfide towards electrochemical stability of sodium-ion battery electrode. MRS Spring/Fall Meeting & Exhibit. Virtual, December 2020. (Poster)

  92. Z. Ren, C. Gervais and G. Singh. Preparation and characterization of electrospun SiOC ceramic fiber mat from cyclic siloxane and organic spinning agent. ICACC-S18-P113-2020, 44th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Poster)

  93. Z. Ren, C. Gervais and G. Singh. Preparation and Structure of SiOC Fibers Derived from Cyclic Silazane/PAA Hybrid Precursor. ICACC-S18-P112-2020, 44th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Poster)

  94. D. Soares and G. Singh. Two dimensional nanomaterials functionalized by polymer-derived ceramic as stable battery electrodes. Poster Presentation. ICACC-S6-P088-2020, 44th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Poster)

  95. S. Bin-Mujib, B. Vessalli, W. Bizzo, T. Mazon, G. Singh. Biomass derived carbons and PDC functionalized carbon composite for electrochemical energy storage. Poster Presentation. ICACC-S6-P090-2020, 44th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Poster)

  96. S. Bin-Mujib, R. Cuccato, S. Mukherjee, G. Franchin, P. Colombo, and G. Singh. Electrospun SiOC Ceramic Fiber Mats as Freestanding Electrodes for Electrochemical Energy Storage Applications Poster Presentation. ICACC-S6-P091-2020, 44thInternational Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Poster)

  97. S. Bin-Mujib, S. Mukherjee, D. Arreola, D. Soares, and G. Singh. Corrosion Resistance of 2D Nanomaterial-based Coatings on Stainless Steel Substrates. Poster Presentation. ICACC-S1-P076-2020, 44th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Poster)

  98. D. Soares, R. Vicentini, G. Singh, A. C. Peterlevitz, H. Zanin. Tungsten oxide and carbide composite electrodes for electrochemical capacitors synthesized by Hot Filament Vapor Deposition technique. ICACC-S6-037-2020, 44th International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2020. (Oral).

  99. G. Singh. “Molecular Precursor Derived Ceramics and  2-D Layered Composites for Metal-Ion Batteries”. Indian Institute of Technology Ropar, India, January 2020. (Invited) (Oral).

  100. G. Singh. “PDC Research at Kansas State University”. Chemical Engineering, Universidade Federal de Santa Catarina UFSC, Florianopolis, Santa Catarina, Brazil, Dec 2019. (Invited) (Oral).

  101. G. Singh. “Molecular Precursor Derived Ceramics and  2-D Layered Composites for Metal-Ion Batteries”. Electrical Engineering, UNICAMP, Campinas, Sao Paulo, Brazil, Dec 2019. (Invited) (Invited) (Oral).

  102. F. Toigo, S. Bin-Mujib, G. Franchin, P. Colombo, G. Singh. Additive Manufacture of SiOC Composites and Investigation of their Electrochemical Behaviour for Energy Storage Application. Poster Presentation. IMECE2019-13203, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster)  

  103. S. Bin-Mujib, B. Vessalli, W. Bizzo, T. Mazon, G. Singh. Electrochemical Performance of Biomass Derived Carbons and PDC Functionalized Carbon Composite. Poster Presentation. IMECE2019-12742, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster)  

  104. D. Soares and G. Singh. Electrochemical Performance of Polymer-Derived Ceramic Functionalized Transition Metal Dichalcogenides. Poster Presentation. IMECE2019-12741, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster)

  105. S. Bin-Mujib, S. Mukherjee, D. Arreola, D. Soares, and G. Singh. Assessing Corrosion Resistance of 2D Nanomaterial-based Coatings on Stainless Steel Substrates. Poster Presentation. IMECE2019-12759, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster)

  106. S. Bin-Mujib, R. Cuccato, S. Mukherjee, G. Franchin, P. Colombo, and G. Singh. Electrospun SiOC Ceramic Fiber Mats as Freestanding Electrodes for Electrochemical Energy Storage Applications. Poster Presentation. IMECE2019-12758, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster) 

  107. T. Hieber, M. I. Cheikh, B. Kulbago, J. Chen, G. Singh, Z. C. Leseman. Validation of an Atomistic Field Theory for Contact Electrification Using a MEMS Load Cell. Poster Presentation. IMECE2019-12728, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster) 

  108. D. Soares, R. Vicentini, A. C. Peterlevitz, G. Singh, H. Zanin. Synthesis of Tungsten Oxide and Carbide Composite by Hot Filament Chemical for Aqueous-Based Electrolytes for Supercapacitors. Poster Presentation. IMECE2019-12820, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster)

  109. D. Soares, R. Vicentini, H. Zanin, G. Singh. Core/shell Nb2O5 Nanoparticles/Carbon on Carbon Nanotubes as Symmetrical Supercapacitor Electrodes. Poster Presentation. IMECE2019-12743, ASME International Mechanical Engineering Congress and Exposition, Salt Lake City, UT, November 2019. (Poster)

  110. D. Soares and G. Singh. Electrochemical Behavior of Polymer-Derived Ceramic Functionalized Transition Metal Dichalcogenides. Symposium: 05: Polymer Derived Ceramics (PDCs), Pacrim13 conference, Okinawa, Japan, October 2019 (Poster) (Invited).

  111. S. Bin-Mujib, B. Vessalli, W. Bizzo, T. Mazon, G. Singh. Electrochemical Performances of Biomass Carbons Derived from Cassava and Bamboo as Advanced Electrode Materials, P1-106, Materials Science and Technology Conference, Portland, OR, October 2019. (Poster)  

  112. Z. Ren, C. Gervais and G. Singh. Carbon Rich SiOCN Fibers from Silazane/PAA Hybrid Polymer, P1-108, Materials Science and Technology Conference, Portland, OR, October 2019. (Poster)  

  113. D. Soares and G. Singh. Electrochemical Behavior of Functionalized Transition Metal Dichalcogenide Nanosheets. Session: 2D Materials & Beyond: Innovative Materials, Assemblies & Devices for Energy & Fuel. ACS Fall 2019 National Meeting & Exposition in San Diego, CA, August 25 - 29, 2019. (Oral) (Invited).

  114. Z. Ren, C. Gervais and G. Singh. “Preparation and Structure of SiOC Fibers Derived from Cyclic Silazane/PAA Hybrid Precursor”. National Science Foundation PIRE Workshop, Boulder, CO, July 2019. (Poster)

  115. D. Soares, R. Vicentini, H. Zanin, G. Singh. “Core/shell Nb2O5 Nanoparticles/Carbon on Carbon Nanotubes as Symmetrical Supercapacitor Electrodes”. National Science Foundation PIRE Workshop, Boulder, Colorado, July 2019. (Poster)

  116. S. Bin-Mujib, B. Vessalli, W. Bizzo, T. Mazon, G. Singh. “Biomass Derived Carbons and PDC Functionalized Carbon Composite for Electrochemical Energy Storage”. National Science Foundation PIRE Workshop, Boulder, Colorado, July 2019. (Poster)

  117. F. Toigo, G. Franchin, P. Colombo, G. Singh. “Additive Manufacture of SiOC Composites and Investigation of Their Electrochemical Behaviour for Energy Storage Application”. National Science Foundation PIRE Workshop, Boulder, Colorado, July 2019. (Poster)

  118. G. Singh. “Molecular Precursor Derived Ceramics and Layered Composites for Energy Storage Devices”. Chemical Engineering and Bioengineering Seminar, Washington State University, May 2019. (Invited) (Oral).

  119. G. Singh. “Molecular Precursor Derived Ceramic Composites for Electrochemical Energy Storage”. International Symposium on “Frontiers of Energy Materials”, University of Cologne, Germany, May 2019. (Invited) (Oral).

  120. R. Cuccato, G. Franchin, S. Mukherjee, M. Abass, P. Colombo, and G. Singh. "Polymer-derived Ceramic Fiber-based Electrodes for Electrochemical Energy Storage".  43rd International Conference and Exposition on Advanced Ceramics and Composites. Daytona Beach, FL, January 2019. (Invited) (Oral).

  121. K. Mcloud, S. Mukherjee, and G. Singh. "Transition metal dichalcogenides (TMDs) for application as supercapacitor electrodes", ASME International Mechanical Engineering Congress & Exposition, Pittsburgh, PA, November 2018. (Poster)

  122. L. David and G. Singh. Polymer-derived Ceramic Nanocomposites for Electrochemical Energy Storage. Symposium P06: Molecular Preparative Approaches to Functional Materials. Materials Science and Engineering (MSE) Congress, Darmstadt, Germany, September 2018. (Oral-Keynote) (Invited).

  123. G. Singh. “Molecular Precursor-Derived Ceramics for Electrochemical Energy Storage Applications”. 2nd Annual Energy Harvesting Society Meeting at Penn State at The Navy Yard, Philadelphia, PA, September 2018. (Invited) (Oral).

  124. G. Singh. “Polymer Derived Ceramic Layered Composite Electrodes for Electrochemical Energy Storage Devices”. Symposium T1S7: Advanced Batteries and Supercapacitors for Energy Storage Applications. 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE 2018), Singapore, July 2018. (Invited) (Oral).

  125. R. Cuccato, G. Franchin, S. Mukherjee, M. Abass, P. Colombo, and G. Singh. “Silicon Oxycarbide Micro and Nanostructured Electrodes for Electrochemical Energy Storage”. Symposium 18 - Polymer-derived ceramics development and applications, International Congress on Ceramics. Foz do Iguaçú, Brazil, June 2018. (Oral)

  126. G. Singh. “My Experience with NSF CAREER”. NSF-CAREER workshop 2018, Texas A&M University, College Station, TX, May 2018. (Invited) (Oral).

  127. L. David, S. Mukherjee*, M. Abass, and G. Singh. “Exfoliated Transition Metal Dichalcogenide (TMD) Nanosheets for Supercapacitor and Sodium Ion Battery (SIB) Applications”. 233rd ECS Meeting, Seattle, WA, May 2018. (Oral)

  128. D. Arreola*, M. Abass, S. Mukherjee, and G. Singh. “Electrochemical Corrosion Studies of 2D Materials– coated Stainless Steel”. 233rd ECS Meeting, Seattle, WA, May 2018. (Poster)

  129. G. Singh. “Molecular Precursor Derived Ceramics and Hybrids”. 81st Annual session of Indian Ceramic Society and International conference on Expanding Horizons of Technological Applications of Ceramics and Glasses, Pune, India, December 2017. (Oral-Keynote) (Invited).

  130. G. Singh. “Molecular Polymer-derived Ceramics for Applications in Electrochemical Electrochemical Energy Storage Devices”. ES04: Interfaces in Electrochemical Energy Storage, MRS Fall meeting, Boston, MA, December 2017. (Invited) (Oral).

  131. J. Turnley, and G. Singh. “Transition Metal Dichalcogenides for Application in Supercapacitors”. ASME International Mechanical Engineering Congress & Exposition, Tampa Bay, CA, November 2017. (Poster)

  132. M. Abass, L. David, and G. Singh. “Exfoliation of Transition Metal Dichalcogenides into Nanosheets and Performance as Sodium Ion Battery Electrode”. Materials Science and Technology Conference, Pittsburgh, PA, October 2017. (Invited) (Oral).

  133. G. Singh. “Molecular Precursor-derived Ceramics for Electrochemical Energy Storage Applications”. SBPMAT, Brazilian Materials Research Society Meeting, Gramado, Brazil, September 2017. (Invited) (Oral).

  134. G. Singh. “Molecular Precursor Derived Ceramics and Layered Composites for Energy Storage Devices”. Department of Mechanical Engineering, University of Campinas, Sao Paulo State, Brazil, September 2017. (Invited) (Oral).

  135. G. Singh. “Molecular Precursor Derived Ceramics and Layered Composites for Energy Storage Devices”. Materialwissenschaft, Technische Universität Darmstadt, Germany, July 2017. (Invited) (Oral).

  136. G. Singh. “Three-dimensional Polymer-Derived Ceramic Composite Paper Electrode for Electrochemical Energy Storage Applications”. 15th Conference & Exhibition of the European Ceramic Society, ECerS2017, July 2017. (Oral).

  137. G. Singh. “Molecular Precursor Derived Ceramics and Layered Composites for Energy Storage Devices”. UNESP: Câmpus de Araraquara - Instituto de Química, SP, Brazil June 2017. (Invited) (Oral).

  138. G. Singh. “Molecular Precursor Derived Ceramics and Layered Composites for Energy Storage Devices”. Chemistry Department at Federal University of Sao Carlos (UFSCar) in Sao Carlos, SP, Brazil, June 2017. (Invited) (Oral).

  139. G. Singh. “Molecular Precursor Derived Ceramics and 2-D Layered Composites for Energy Storage Applications”. Mechanical Engineering Department, Texas A & M University, May 2017. (Invited) (Oral).

  140. M. A. Abass, and G. Singh. “Boron-modified Silicon Oxycarbide Composite Electrode for Electrochemical Energy Storage”, Symposium: PACRIM Symposium 04: Polymer-Derived Ceramics (PDCs) and Composites, PACRIM12 Conference, Waikoloa, Hawaii (2017). (Invited) (Oral).

  141. M. A. Abass, M. S. Kolathodi, and G. Singh. “Boron-modified Silicon Oxycarbide/graphene Composite Paper Electrode for Electrochemical Energy Storage”, Symposium: ES2: High-Capacity Electrode Materials for Rechargeable Energy Storage, MRS Meeting, Phoenix, AZ (2017). (Poster)

  142. L. David, M. Abass, and G. Singh. “Spontaneous Exfoliation of Transition Metal Dichalcogenide Crystals and Performance as Electrodes for Rechargeable Batteries and Supercapacitors”, Symposium: ES2: High-Capacity Electrode Materials for Rechargeable Energy Storage, MRS Meeting, Phoenix, AZ (2017). (Poster)

  143. J. Petrovick, G. Biby, M. A. Abass, and G. Singh. “Electrochemical Performance of TMD/KMnO4 Hybrids as Supercapacitor Electrode Materials”, # 2637463, Category: ES2: High-Capacity Electrode Materials for Rechargeable Energy Storage, MRS Meeting, Phoenix, AZ (2017). (Poster)

  144. M. A. Abass, M. S. Kolathodi, and G. Singh. “Boron-modified Silicon Oxycarbide/graphene Composite Paper Electrode for Electrochemical Energy Storage”. International Workshop on Advanced Materials (IWAM-2017), Ras Al Khaimah, UAE (2017). (Invited) (Poster)

  145. M. A. Abass, L. David, M. S. Kolathodi, and G. Singh. “Silicon Oxycarbide/graphene Composite Paper Electrode for Electrochemical Energy Storage”. Symposium: Novel Electrode Materials and Architectures for Energy and Sensing Applications at the 51st ACS-MWRM, Manhattan, KS, October 2016.  (Invited) (Oral)

  146. G. Singh. “Exfoliation and Alkali Metal-ion Cycling Behavior of Transition Metal Chalcogenide Nanosheets”. MRS-Brazil Meeting, Campinas, Brazil, September 2016. (Invited) (Oral)

  147. G. Singh. “Molecular Precursor Derived Ceramics and their Interfacing with 1-D and 2-D Materials for Extreme Engineering Applications”. University of North Carolina Nanotechnology Seminar Series, August 2016. (Invited) (Oral)

  148. L. David, M. Abass, and G. Singh. “Exfoliation and sodium cycling behavior of transition metal dichalcogenide nanosheets”. 252nd American Chemical Society National Meeting, Philadelphia, PA, August 2016. (Invited) (Oral)

  149. G. Singh. “Precursor-Derived Ceramic Nanowire and Nanosheet Composites for High Power Laser Radiometry”. 9thInternational Conference on High Temperature Ceramic Matrix Composites (HTCMC-9), Toronto, Canada, June 2016.(Oral)

  150. Harrison Gunn, Victoria Voigt, K. M. Shareef, and G. Singh. “Modified Graphene Oxide for Long Cycle Sodium-Ion Batteries”. MRS Meeting, Pheonix, AZ, March/April 2016. (Poster)

  151. K. M. Shareef, M. Palei, Victoria Voigt, T. S. Natarajan, and G. Singh. “Synthesis of Novel Birnessite Type MnO2Nanochains by Electrospinning and Their Application as Supercapacitor Electrodes”. MRS Meeting, Pheonix, AZ, March/April 2016. (Poster)

  152. K. M. Shareef, Harrison Gunn, Victoria Voigt, and G. Singh. “Modified Graphene Oxide for Long Cycle Sodium-Ion Batteries”. APS March Meeting, Baltimore, MD. March 2016. (Poster)

  153. K. M. Shareef, M. Palei, T. S. Natarajan, and G. Singh. “MnO2 Encapsulated Electrospun TiO2 Nanofibers: A Strategic Approach towards the Development of Aqueous Electrolyte Based Asymmetric Supercapacitors”. APS March Meeting, Baltimore, MD. March 2016. (Oral)

  154. K. M. Shareef, M. Palei, T. S. Natarajan, and G. Singh. “A Strategic Approach for the Synthesis of MnO2 Nanochains by Electrospinning towards Energy Storage Applications”. International Workshop on Advanced Materials (IWAM 2016), Ras Al Khaimah, UAE. February 2016. (Invited) (Poster).

  155. G. Singh. Polymer to Ceramic Transformation of Polysilazane Wrapped Nanotubes and their Applications in Energy-Based Devices. TMS, 145th Annual Meeting & Exhibition, Nashville, TN, February 2016. (Invited) (Oral).

  156. G. Singh. Chemically Modified Graphene/PDC Electrodes for Long-Cycle Lithium-Ion Batteries. 40th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, FL, January 2016. (Invited) (Oral).

  157. L. David, and G. Singh. “Siliconoxycarbide Encapsulated Graphene Free-Standing Papers as Li-ion Battery Anode”. Program: Symposium H-Mechanics of Energy Storage and Conversion─Batteries, Thermoelectrics and Fuel Cells MRS-Spring Meeting 2015 (Poster). MRS Meeting, San Francisco, CA, April 2015 (Poster).

  158. G. Singh. Chemically Modified Graphenes (CMG): A Flexible Approach to the Design of Metal-Ion Battery Electrodes. Materials Challenges in Alternative & Renewable Energy, South Korea, February 2015. (Invited) (Oral).

  159. G. Singh. Graphene-Based Electrodes for Long-Cycle Metal-Ion Rechargeable Batteries. Physics Condensed Matter Seminar Series, Kansas State University, February 2015. (Invited) (Oral).

  160. L. David, and G. Singh. “MoS2 Paper Electrodes for Na-Ion Battery Applications: Electrochemical and Mechanical Characterization”. Z2.05. Program—Symposium Z: Materials Challenges for Energy Storage Across Multiple Scales, MRS Meeting, Boston, MA, December 2014. (Oral)

  161. L. David, D. Asok, S. Pahwa, and G. Singh. “Extreme Rate Capability of Hybrid Al-Modified Si-C-N Carbon Nanotube Spray Coatings as Li-Ion Battery Electrodes”. Y8.02. Program—Symposium Y: Technologies for Grid-Scale Energy Storage, MRS Meeting, Boston, MA, December 2014. (Oral)

  162. L. David, S. Pahwa, E. Mansfield, A. Feldman, J. Lehman, and G. Singh. “Nanostructured Thermal Absorber Coatings of Graphene-Carbon Nanotube Hybrid Composite for High-Power Laser Radiometry”. L16.05. Program—Symposium L: Optical Metamaterials and Novel Optical Phenomena Based on Nanofabricated Structures, MRS Meeting, Boston, MA, December 2014. (Oral)

  163. L. David, S. Pahwa, and G. Singh. “Flexible Three Dimensional Paper Electrodes of Molecular Precursor Derived Si-B-C-N/Graphene Composite For Advanced Li-Ion Battery Applications”. Z9.24. Program—Symposium Z: Materials Challenges for Energy Storage Across Multiple Scales, MRS Meeting, Boston, MA, December 2014. (Poster)

  164. L. David, D. Asok, U. Barrera, E. Black, and G. Singh. “High Rate Capability of Si-Al-C-N Functionalized Carbon Nanotubes as Li-ion Battery Electrodes”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Oral) 

  165. L. David, and G. Singh. “Large Area MoS2/rGO Paper Electrodes for Room Temperature Na-Ion Batteries”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Oral) 

  166.  L. David, and G. Singh. “Reduced Graphene Oxide Paper Electrodes For Lithium-ion and Sodium-ion Batteries Applications”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Oral) 

  167. L. David, S. Pahwa, and G. Singh. “Lithiation/Delithiation Behavior of Graphene Films Prepared by Atmospheric Pressure Chemical Vapor”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Poster) 

  168. L. David, A. Feldman, E. Mansfield, J. Lehman, S. Pahwa, and G. Singh. “High Laser Thermal Damage Resistance of Chemically Modified Graphene/Carbon Nanotube Hybrid Spray Coatings”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Poster)

  169.  L. David, R. Bhandavat, U. Barrera, S. Pahwa, and G. Singh. “Polymer-derived Ceramic Functionalized Molybdenum disulfide as a Stable Lithium-ion Battery Electrode”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Poster) 

  170.  L. David, R. Bhandavat, U. Barrera, S. Pahwa, and G. Singh. “Synthesis of SiOC Intercalated Graphene Paper and Electrochemical Performance as LIB Electrode”. Materials Science and Technology Conference, Pittsburgh, PA, October 2014. (Poster)

  171. G. Singh. “Boron Containing PDC Coatings.” Review of the NHSC Program and Future of High Temperature Structural Ceramics, University of Colorado at Boulder, Boulder, CO, July 2014. (Invited) (Oral).

  172. L. David, and G. Singh. “MoS2/graphene Composite Paper Electrodes for Na-ion Battery Applications.” J25.00008. Session J25: Focus Session: Materials for Electrochemical Energy Storage: Capacitors. APS Meeting, Denver, CO, March 2014. (Oral)

  173. L. David, R. Bhandavat, U. Barrera and G. Singh. “Performance of Silicon Carbonitride Functionalized MoS2 Nanosheets as Lithium-ion Battery Anode.” C1.00026. APS Meeting, Denver, CO, March 2014. (Poster)

  174. L. David, D. Asok, and G. Singh. “Al-Modified SiCN Carbon Nanotube Coatings as Lithium ion Battery Electrode.” H1.00086. APS Meeting, Denver, CO, March 2014. (Poster)

  175. L. David, and G. Singh. “SiBCN-CNT/Graphene Paper Electrode.” H1.00096. APS Meeting, Denver, CO, March 2014. (Poster)

  176. L. David, A. Feldman, E. Mansfield, J. Lehman, and G. Singh. “Evaluating the Thermal Damage Resistance of Reduced Graphene Oxide/Carbon Nanotube Hybrid Coatings.” H1.00223. APS Meeting, Denver, CO, March 2014. (Poster)

  177. G. Singh. “Robust Li-ion Battery Anodes Prepared from Nanostructured Polymer-Derived Ceramics.” ICACC-S7-035-2014, S7-08. Nanomaterials for Energy IV: Batteries II, 38th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2014. (Invited) (Oral).

  178. L. David, and G. Singh. “Electrochemical Performance of Large Area Graphene Films Prepared by Rapid Heating and Quenching at Ambient Pressures.” ICACC-S6-013-2014, LIONBAT3. Li-ion Battery Technology - Diagnostics and Characterization, 38th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2014. (Oral)

  179. L. David, and G. Singh. “Stable Electrochemical Performance of Graphene/SiBCN Layered Composite Electrode for Lithium Ion Battery Applications.” ICACC-S6-017-2014, LIONBAT4. Li-ion Battery Technology - Characterization and Design, 38th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2014. (Oral)

  180. L. David, and G. Singh. “Free-Standing Polymer Derived SiCN/ MoS2 Composite Paper Anode for Li-Ion Battery.” ICACC-S6-P066-2014, 38th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2014. (Poster)

  181. L. David, and G. Singh. “Polymer-derived Siliconoxycarbide Intercalated Graphene Composite Papers for Li-ion Battery Anode.” ICACC-S6-P065-2014, 38th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2014. (Poster)

  182. L. David, and G. Singh. “Few Layer SiCN/MoS2 Composite Paper Anode for Fast and Reversible Li+ Storage.” CC9.27. Program - Symposium CC: Advanced Materials for Rechargeable Batteries, MRS Meeting, Boston, MA, December 2013. (Poster)

  183. L. David, and G. Singh. “Pyrolysis and Electrochemical Lithiation Behavior of Graphene Oxide-Polysiloxane Nano-Composite Paper Prepared via Vacuum-Assisted Self-Assembly”. CC6.27. Program - Symposium CC: Advanced Materials for Rechargeable Batteries, MRS Meeting, Boston, MA, December 2013. (Poster)

  184. L. David, and G. Singh. “Synthesis and Electrochemical Lithiation Behavior of Graphene Films on Ni And Cu Substrates.” RR15.137. Program - Symposium RR: Large-Area Graphene and Other 2D-Layered Materials–Synthesis, Properties and Applications, MRS Meeting, Boston, MA, December 2013. (Poster)

  185. E. Black, R. Bhandavat, A. Feldman, L. David, C. Cromer, J. Lehman, and G. Singh. “High Optical Absorbance and Laser Damage Resistance of Si(B)CN/Carbon Nanotube Composite Coatings.” Paper Number: IMECE2013-67287, ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA, December 2013. (Poster)

  186. G. Singh. “Very High Laser-damage Threshold of Polymer-derived Si(B)CN- Carbon Nanotube Composite Coatings.” Nanotechnology for Defense Conference, Tucson, AZ, November 2013. (Invited) (Oral).

  187. L. David, R. Bhandavat, and G. Singh. “Electrochemical Performance of Acid Functionalized Tungsten Disulfide Nanosheets.” Materials Science and Technology Conference, Montreal, Canada, October 2013. (Oral)

  188. R. Bhandavat and G. Singh. “Polymer-derived SiOC/Carbon nanotube Shell/Core Composite as a Stable Li-Ion Battery Anode.” Symposium: Energy and Functional Applications I. 10th Pacific Rim Conference on Ceramic and Glass Technology, San Diego, CA, June 2013. (Oral)

  189. R. Bhandavat, A. Feldman, J. Lehman, C. Cromer, and G. Singh. “Very High Laser-damage Threshold of Polymer-derived Si(B)CN-carbon Nanotube Composite Coatings.” Symposium DDD: Extreme Environments—A Route to Novel Materials. MRS Meeting, San Francisco, CA, April 2013. (Oral)

  190. L. David and G. Singh. “Rapid Synthesis of Few Layer Graphene Films and Their Electrochemical Behavior as Li-ion Battery Anode.” Session C39: Focus Session: Materials for Electrochemical Energy Storage I. APS March Meeting, Baltimore, MD, March 2013. (Oral)

  191. L. David and G. Singh. “Vacuum-Assisted Self-Assembly of Polymer Derived Siliconoxycarbide-Graphene Composite as Li-ion Battery Anode.” Session H1: Poster Session I. APS March Meeting, Baltimore, MD, March 2013. (Poster)

  192. L. David and G. Singh. “Self-standing Paper Based Anodes Prepared From Siliconcarbonitride-MoS2 Composite For Li-ion Battery Applications.” Session Q1: Poster Session II. APS March Meeting, Baltimore, MD, March 2013. (Poster)

  193. R. Bhandavat and G. Singh. “Polymer-derived SiCN/MoS2 Nanosheet Composite for Next generation Lithium Ion Battery Anodes.” MRS Meeting, San Francisco, April 2012. (Oral)

  194. R. Bhandavat, M. Cologna, R. Raj and G. Singh. “Synthesis and Electrochemical Performance of SiOC-Carbon Nanotube Composite Nanowires.” MRS Meeting, San Francisco, April 2012. (Poster)

  195. R. Bhandavat C. Cromer, J.H. Lehman and G. Singh. “Si(B)CN-Carbon nanotube Composite for High-Power Laser Radiometry.” Session: Optical and Thermal Radiative Properties”. 18th Symposium on Thermophysical Properties, Boulder, CO, June 2012. (Oral)

  196. R. Bhandavat and G. Singh. “Polymer-derived Ceramic SiCN-MoS2 Nanosheet Composite for Lithium Ion Battery Anodes.” APS Meeting, Boston, MA, March 2012. (Poster)

  197. R. Bhandavat and G. Singh. “Synthesis and High Temperature Stability of Amorphous Si(B)CN-MWCNT Composite Nanowires.” Session W6: Focus Session: Carbon Nanotube Synthesis, Structure and Defects. APS Meeting, Boston, MA, March 2012. (Oral)

  198. R. Bhandavat, M. Cologna, R. Raj and G. Singh. “Synthesis and Electrochemical Performance of SiOC-Carbon Nanotube Composite Coatings.” APS March Meeting, Boston, MA, March 2012. (Poster)

  199. L. David, R. Bhandavat, U. Barrera and G. Singh. “Synthesis and Chemical Characterization of SiOC-Graphene Composite Paper.” Materials Science and Technology Conference, Pittsburgh, PA, October 2012. (Oral)

  200. R. Bhandavat, J. Lehman, C. Cromer and G. Singh. “Polymer-Derived Si(B)CN-MWCNT Composite Coatings for High Power Laser Radiometry.” Materials Science and Technology Conference, Pittsburgh, PA, October 2012. (Oral)

  201. L. David and G. Singh. “Synthesis of Large-Area Few Layer Graphene Films by Rapid Heating and Cooling in a Modified APCVD Furnace.” Materials Science and Technology Conference, Pittsburgh, PA, October 2012. (Oral)

  202. R. Bhandavat, L. David, U. Barrera and G. Singh. “MoS2-SiCN Nanosheet Composite for Lithium Ion Battery Anodes.” Materials Science and Technology Conference, Pittsburgh, PA, October 2012. (Oral)

  203. R. Bhandavat, R. Raj, and G. Singh. “Electrochemical Performance of Polymer Derived Si(B)CN-Carbon Nanotube Core Shell Composite Nanowire Coatings.” Materials Science and Technology Conference, Pittsburgh, PA, October 2012. (Oral)

  204. R. Bhandavat and G. Singh. “Synthesis, Characterization and High Temperature Stability of Polymer-derived Ceramic Si(B)CN Coated Carbon Nanotubes.” NSF-EPSCoR Conference, Wichita, KS, January 2012. (Poster)

  205. R. Bhandavat, L. David, U. Barrera and G. Singh. “Synthesis and Electrochemical Analysis of SiCN‐MoS2 Nanosheet Composite for Lithium Ion Battery Anodes.” 36th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2012. (Oral)

  206. R. Bhandavat and G. Singh. “Synthesis and Electrochemical Performance of SiOC‐Carbon Nanotube Composite Nanowire Coatings.” 36th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2012. (Oral)

  207. R. Bhandavat, W. Kuhn, E. Mansfield, and G. Singh. “Microwave Assisted Synthesis of Si(B)CN‐MWCNT Free‐Standing Paper for High Temperature Applications.” 36th International Conference and Expo on Advanced Ceramics and Composites, Daytona Beach, FL, January 2012. (Oral)

  208. G. Singh. "Synthesis and Characterization of Polymer-derived Si(B)CN-Carbon Nanotube Nanowires for Applications in Energy Devices." NSF-EPSCoR Kansas Center for Solar Energy Research, Manhattan, KS, September 2011. (Invited) (Oral).

  209. R. Bhandavat and G. Singh. “Synthesis and Spectroscopic Characterization of Si(B)CN Composite Nanowires.” Materials Science and Technology Conference, Columbus, OH, October 2011. (Oral)

  210. L. David, R. Bhandavat, U. Barrera and G. Singh. “Large-Scale Synthesis of MoS2/ Polymer Derived Ceramic Composite Nanosheets.” Materials Science and Technology Conference, Columbus, OH, October 2011. (Oral)

  211. G. Singh. “Synthesis, Characterization and Testing of Polymer-derived Ceramic Composite Nanowires.” 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, FL, January 2011. (Invited) (Oral).

  212. R. Bhandavat and G. Singh. “Analysis of Si(B)CN Nanowires.” Electronic Materials and Applications Conference (EMA 2011), Orlando, FL, January 2011. (Invited) (Oral).

  213. G. Singh, A. Slifka, P. Rice, D. Lauria and R. L. Mahajan. “Fabrication and Optical Manipulation of an Individual Carbon Nanotube-Sphere Mechanical Force Sensor.” ASME IMECE Micro/Nano Poster Forum, Denver, CO, 2011. (Poster)

  214. G. Singh, R. Bhandavat, K. Hurst, E. Mansfield, J. Perkins, C. Cromer, R. Mahajan and J. Lehman. “Polymer Derived SiCN and SiCN/Multiwalled Carbon Nanotubes for High Power Laser Radiometry.” Materials Science and Technology Conference, Houston, TX, October 2010. (Poster) 

  215. G. Singh. “Nanowire Based Devices for Sensing and Energy Generation”. Chemical Engineering Seminar Series, Kansas State University, November 2009. (Invited) (Oral).

  216. G. Singh. “Fabrication and Testing of Nanoscale Devices.” Physics Condensed Matter Seminar Series, Kansas State University, September 2009. (Invited) (Oral).

  217. V. Bedekar, G. Singh, R. Mahajan and S. Priya. “Barium Titanate Nano-Particles Decorated SiCN/MWCNT Nanotubes: Synthesis and Microstructural Characterization.” Materials Science and Technology Conference, Pittsburgh, PA, October 2009. (Oral)

  218. G. Singh. “Nanotechnology Solutions for Energy Harvesting.” 4th Annual Energy Harvesting Workshop, Blacksburg, VA, January 2009. (Invited) (Oral).

  219. G. Singh. “Nanofabrication in the Dual Beam Focused Ion Beam (FIB).” Nanomaterials Characterization Facility, University of Colorado at Boulder, CO, August 2008. (Invited) (Oral).

  220. G. Singh. “Fabrication and Mechanical Characterization of Individual Carbon Nanotube Based Devices.” Intel Corp., Hillsboro OR, July 2007. (Invited) (Oral).

  221. G. Singh, P. Rice, J. R. McIntosh and R. L Mahajan. “Fabrication and Mechanical Characterization of CNT Based Nanoknives.” 2nd Annual CU-NIST Research Symposium, Boulder, CO, March 2007. (Poster)

  222. G. Singh, Paul Rice, Richard McIntosh and Roop L Mahajan. “Fabrication and Mechanical Characterization of Carbon Nanotube Based Nanoknives.” IMECE2006- 14659, ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, 2006. (Oral)

  223. G. Singh, R. Raj, Y. Yu and F. Ernst. “The Mechanical Strength Of Al-MgAl2O4 Interfaces.” Graduate Engineering Annual Research Symposium (GEARS), University of Colorado at Boulder, March 2006. (Poster)

  224. Y. Yu, J. Mark, F. Ernst, T. Wagner, G. Singh and R. Raj. “Diffusion Reactions at Metal–oxide Interfaces: The Effect of an Applied Electric Field.” TMS, 135th Annual Meeting and Exhibition, San Antonio, TX, March 2006. (Invited) (Oral).

  225. G. Singh, R. Raj, Y. Yu and F. Ernst. “Ion Exchange and Mechanical Characteristics at Metal-oxide Interfaces.” Graduate Engineering Annual Research Symposium (GEARS), University of Colorado at Boulder, March 2005. (Poster)

  226. G. Singh and K. Gall. “Study of Structural and Mechanical Properties of Si Nanowires using Atomistic Simulations (MEAM Approach).” Graduate Engineering Annual Research Symposium (GEARS), University of Colorado at Boulder, March 2004. (Oral)

  227. Y. Yu, J. Mark, F. Ernst, G. Singh and R. Raj. “Ion Exchange at Metal-oxide Interfaces.” Microscopy and Microanalysis, ORNL, TN, 2004. (Poster)               

Disclaimer:
Readers may view, browse, and/or download material for temporary copying purposes only, provided these uses are for noncommercial personal purposes. Except as provided by law, this material may not be further reproduced, distributed, transmitted, modified, adapted, performed, displayed, published, or sold in whole or part, without prior written permission from the publisher and the web site owner.

bottom of page